Plastics and packaging is a “follow-the-customer” industry — electronics and food FDI plants locate somewhere, packaging follows. Vietnam, Thailand, Indonesia — ASEAN’s three biggest FDI markets. This article compares on plastics-and-packaging specifics.
1. What do plastics & packaging need? Industry criteria
- Customers: FDI plants (electronics, food, FMCG) — where they are;
- Feedstock: petrochemical resin — supply and price;
- Tooling: fast, precise mould-making — local capability;
- Certification: food packaging needs food safety;
- Logistics: bulky packaging — nearer the customer the better.
2. Vietnam: riding the FDI wave
- Pro: the electronics and food FDI wave — many packaging customers;
- Pro: a growing mould cluster — near China;
- Pro: competitive costs;
- Con: resin must be imported — no major petrochemicals;
- Con: high-end packaging technology still limited.
3. Thailand: the complete industrial cluster
- Pro: has petrochemicals — domestic resin supply;
- Pro: large auto and food clusters — stable packaging customers;
- Pro: ASEAN’s best mould technology;
- Con: overall costs run higher than Vietnam;
- Con: partly saturated market — fierce competition.
4. Indonesia: feedstock and domestic market
- Pro: has petrochemicals — domestic resin;
- Pro: a huge domestic market — FMCG, food;
- Pro: low costs;
- Con: a weak mould cluster — moulds imported;
- Con: archipelago logistics — inter-island transport is pricey.
5. Comparison table
| Criterion | Vietnam | Thailand | Indonesia |
|---|---|---|---|
| FDI customers | Very many | Many | Average |
| Domestic resin | No | Yes | Yes |
| Mould-making | Rising | Best | Weak |
| Cost | Low | Medium | Low |
| High-end packaging | Limited | Good | Limited |
6. Resin feedstock: the cost equation
- Reality: resin is a large share of cost — supply decides;
- Thailand/Indonesia: domestic — cheaper and more stable;
- Vietnam: imported — from China, the Middle East, Korea;
- Volatility: oil prices move — long-term supplier contracts;
- Math: resin-price gaps can reverse the labour-cost advantage.
7. Mould-making: capability decides speed
- Role: new design — new mould; mould speed equals launch speed;
- Thailand: fast, precise mould-making — the region’s best;
- Vietnam: rising — near China so imported moulds arrive fast too;
- Indonesia: dependent on imported moulds;
- Strategy: invest in an in-house tool shop at volume.
8. Food packaging: certification
- Requirement: food-contact packaging — food safety;
- Standards: FDA (US), EU 10/2011 — by market;
- Practice: plants need partial clean rooms — higher investment;
- Margin: food packaging earns higher margins than commodity packaging;
- Barrier: certification is a competitive moat — fewer rivals.
9. If you may pick only one
- Following electronics/food FDI customers: Vietnam;
- Needing domestic resin + good tooling: Thailand;
- Domestic market + low cost: Indonesia;
- High-end packaging: Thailand — the best technology.
10. Decision checklist
- Key customers — where are they?
- Resin source — domestic or imported?
- Tooling needs — covered?
- Food packaging — which certifications?
- Distance to customers — how far?
- Total cost — resin priced in?
11. Electronics packaging: anti-static
- Demand: electronic components need anti-static (ESD) packaging;
- Standards: shielding bags and anti-static trays;
- Vietnam: near electronics customers — big demand;
- Margin: ESD packaging priced higher than ordinary;
- Opportunity: few rivals — a good niche.
12. Packaging printing: added value
- Trend: well-printed packaging — branding;
- Technology: offset and flexo printing — machine investment;
- Design: packaging design studios — added services;
- Margin: printing raises value — escaping price competition;
- Thailand: good printing technology — learn from it.
13. Green packaging: the inevitable trend
- Trend: less plastic — paper and biodegradable materials;
- EU: tightening packaging rules — plastic taxes;
- Opportunity: green packaging — higher prices, less competition;
- Investment: paper/bagasse lines — the trend;
- Long term: ordinary plastics gradually replaced — prepare.
14. Following the customer: the playbook
- Map: map your customers’ plants — all three countries;
- Co-locate: locate near the biggest ones — bulky goods punish distance;
- Qualify: get approved as a vendor — audits take months;
- Scale: grow with the customer — capacity reservations;
- Diversify: multiple customers — never one-buyer dependent.
15. Quick answers
- Best for electronics packaging? Vietnam — the customers are there;
- Best technology? Thailand — moulds and printing;
- Best domestic market? Indonesia — FMCG giants.
16. Electronics customers: special demands
- Samsung, Intel: supplier audits — high standards;
- ESD: anti-static packaging — mandatory;
- Clean: partial clean rooms — sensitive components;
- Delivery: JIT — following electronics lines;
- Margin: electronics packaging well-priced — less competition.
17. Packaging-plant startup costs
- Machines: injection and blow moulders — medium capital;
- Moulds: packaging moulds — many types, costs;
- Printing: offset/flexo presses — for printed packaging;
- Warehouse: bulky packaging — big storage;
- Total: moderate capital — lower than auto or panels.
18. Final advice
- Follow customers: where they are — decides 80%;
- Resin: compute carefully — it reverses advantages;
- Tooling: mould capability decides speed;
- Green: green packaging — the future.
19. One-page decision
- Electronics/food FDI customers: Vietnam — follow the wave;
- Resin + tooling: Thailand — complete;
- Domestic market: Indonesia — FMCG giants;
- High-end: Thailand — best technology.
20. Film and flexible packaging
- Segment: shrink film and bags — high volume;
- Technology: multi-layer blown film — investment;
- Customers: food and FMCG — stable orders;
- Competition: price — thin margins;
- Escape: specialisation — technical films.
21. Plastic bottles: its own segment
- Market: beverages and cosmetics — PET and HDPE bottles;
- Technology: bottle-blowing — dedicated machines;
- Near customers: beverage plants — JIT delivery;
- Recycling: rPET — the mandatory trend;
- Opportunity: recycled bottles — premium prices.
22. Rigid packaging: crates and pallets
- Products: crates, pallets and bins — industrial packaging;
- Customers: factories and logistics — B2B;
- Durability: reusable — the selling point;
- Recycling: take-back schemes — circular;
- Margin: better than commodity film.
23. Plastic pallets: a good niche
- Products: plastic pallets and crates — industrial;
- Customers: warehouses and logistics — B2B;
- Reusable: durability — the selling point;
- Margin: better than commodity film.
24. The winning formula
- Follow the customer — location follows demand;
- Resin economics — computed carefully;
- Tooling capability — speed;
- Green packaging — the future.
25. Key contacts to line up
- Key customers — electronics, food and FMCG plants;
- Resin suppliers — long-term contracts;
- Mould-making — tool-shop partners;
- Local counsel — investment licensing.
26. The long game
- Customer intimacy: grow with customers — capacity follows demand;
- Specialisation: niches beat commodities — ESD, food-grade, green;
- Sustainability: green packaging — the inevitable direction;
- Scale: regional footprint — serve ASEAN from two hubs.
Remember: resin economics decide profitability more than labour does — model them carefully for each country.
Green packaging is not a trend to watch but a transition to join — early movers take the premium segment.
Co-locate with your largest customer — bulky packaging punishes every kilometre.
27. Regulatory outlook
- Plastic taxes: spreading globally — price them in;
- Recycled content: mandatory minimums coming;
- Labelling: recycling labels — required;
- Prepare: today’s compliance is tomorrow’s licence to operate.
Final note: packaging looks simple but the economics are subtle — resin, tooling, distance to customer and green regulation together decide who wins.
Start with one anchor customer, prove the quality, then scale — the packaging business is built on trust and proximity.
And measure twice: visit the shortlisted industrial parks in person — the resin supplier across the road is worth more than a 5% labour-cost advantage on paper.
Contact us
FLAT Law Firm advises Chinese investors throughout the Vietnam investment cycle — from deal structuring and licensing to operations and compliance. Contact us for advice tailored to your project.
This article has been quality-reviewed by the FLAW AI Legal Council
