The fire-violation penalty framework for manufacturing FDI is not only money: the most damaging part is suspension of operations at the violating area and remedy costs ordered by inspectors. Where fire safety violation fines for manufacturing FDI enterprises is concerned, management usually faces the question only after the event, while the cheapest handling lies in file preparation and a compliance calendar from the year’s start.
Original texts and validity to verify
From 01/7/2025, fire prevention and fighting is governed by Fire Prevention, Fighting and Rescue Law 55/2024/QH15 and guiding Decree 105/2025/ND-CP, as amended by Decree 347/2026/ND-CP (effective 15/9/2026). Fines follow specific conduct; there is no single figure. Decree 105/2025/ND-CP also regulates compulsory fire and explosion insurance for cases such as fire safety violation fines for manufacturing FDI enterprises, with Appendix VII listing facilities that must buy it — the old framework in Decree 23/2018/ND-CP has expired and must no longer be cited. Suspension applies to violations creating direct fire risk. Fire design approval and acceptance for fire safety violation fines for manufacturing FDI enterprises apply QCVN 06:2022/BXD on fire safety for buildings and works plus sector standards for each production type.
Points that decide the outcome in practice
- Fines follow specific conduct; there is no single figure. Each fire violation — from missing files and unmaintained systems to blocked exits — has its own bracket in the fire-field penalty decree, and the total fine sums the conducts recorded at the facility.
- Suspension applies to violations creating direct fire risk. Faults like dead suppression systems, locked escape routes or misused hazard areas can draw temporary or full suspension of the violating part until remedy passes re-inspection.
- Fast remedy mitigates; repetition aggravates. Administrative penalty law treats voluntary consequence remedy as a mitigating circumstance, while repeat violations after a fine or warning attract aggravation and higher in-bracket fines.
What to do now
- Match each conduct in the inspection record to its bracket to estimate the total fine and budget the remedy.
- Remedy direct-risk faults first within the record’s deadline, ahead of paperwork faults.
- Keep dated remedy evidence and the passing re-inspection record as proof for later inspections.
Conclusion
On fire safety violation fines penalty framework manufacturing FDI, enterprises lose most not because the law is unfavorable but because they discover the problem late; a periodic review calendar costs far less than crisis handling.
Frequently Asked Questions
How much are fire violation fines?
From the actual file’s perspective: Fines follow specific conduct; there is no single figure. Each fire violation — from missing files and unmaintained systems to blocked exits — has its own bracket in the fire-field penalty decree, and the total fine sums the conducts recorded at the facility. Concrete fine figures must be looked up by conduct in the current fire and rescue penalty decree at the time of handling. Keep supporting records year by year.
Which faults lead to suspension?
Short answer: Suspension applies to violations creating direct fire risk. Faults like dead suppression systems, locked escape routes or misused hazard areas can draw temporary or full suspension of the violating part until remedy passes re-inspection. Concrete fine figures must be looked up by conduct in the current fire and rescue penalty decree at the time of handling. Check this against the project file first.
Does remedying reduce the fine?
In principle: Fast remedy mitigates; repetition aggravates. Administrative penalty law treats voluntary consequence remedy as a mitigating circumstance, while repeat violations after a fine or warning attract aggravation and higher in-bracket fines. Concrete fine figures must be looked up by conduct in the current fire and rescue penalty decree at the time of handling. If authority is unclear, ask in writing.
How are repeat violations punished more heavily?
The distinction that matters: Fines follow specific conduct; there is no single figure. Each fire violation — from missing files and unmaintained systems to blocked exits — has its own bracket in the fire-field penalty decree, and the total fine sums the conducts recorded at the facility. Concrete fine figures must be looked up by conduct in the current fire and rescue penalty decree at the time of handling. Fix verbal understandings in writing.
This article has been quality-reviewed by the FLAW AI Legal Council